Screens Enclosure and Lanais Soft Pressure Washing
Power washing can remove most types of mold and algae from screen enclosures. The water pressure and temperature of power washers will force the mold and algae off the screen. Start at low pressure and gradually increase it to clean the entire enclosure. You can rent a power washer from a hardware store. If the buildup is stubborn, you can use a solution of white vinegar and warm water.
Soft washing is recommended to protect screens from damage. It is also safe to use on softer materials such as aluminum. If you use a power washer, be sure to rinse thoroughly. If you are cleaning a screen enclosure with a bleach solution, be gentle to avoid damaging the screen. If you don’t have a pressure washer, use water to rinse the screens before you spray the solution.
You can also use a hose with a bucket of hot soapy water to clean the screen enclosure. Just be sure to use a hose with small bristles to avoid scratching the screen. You can also use a blower to clean out the roof of the enclosure. If you find stains or dirt, brush them off using a soft-bristled brush. Oftentimes, dead insects and fingerprints are the culprits.
If you’re concerned about damage to your screen enclosure, you can hire a cleaning expert to do the job for you. Pressure washing is recommended for aluminum screens and lanais, but soft wash is better for softer surfaces. Just remember that pressure washing can remove dirt and algae from screens, so you need to be careful. If you’re not sure, you can always ask for help. Alternatively, you can contact a local contractor in your area.
If you want to clean your screen enclosure yourself, you can scrub the surface with a brush. However, you should always use a soft-bristled brush to scrub the enclosure. If you have a blower, you can use it to clean the roof as well. Make sure you don’t forget to rinse the screen before applying the bleach solution. Depending on the type of cleaning solution you choose, you may need to repeat the process if you’ve made some mistakes in the past.
A pressure washer can be used for a variety of cleaning purposes, but it should be used only when you’re confident that you can clean the screen enclosure. It’s important to use a low-pressure washer, because high-pressure washing can leave holes in screens and even damage the aluminum frame. You should also clean the screens inside and outside with a soft-wash solution to avoid damaging the screen.